Tektronix WFM 601A, Руководство по обслуживанию

Страница: 22 / 368

WFM 601A, WFM 601E, & WFM 601M Service Manual
1–1
Specifications
This section provides a brief overview of the WFM 601A, WFM 601E, and
WFM 601M waveform monitor product features. The feature list is followed by
the product specifications.
Product Description
The waveform monitors measure and display 4:2:2 component serial digital
signals. The waveform monitors display serial digital signals as the familiar
component signals and in a variety of standard measurement modes. You can use
the EDH (Error Detection and Handling) system and the suite of automated
checks of the serial digital format to verify data integrity.
Most of the features listed in this section are common across all three waveform
monitors. Where a feature applies only to a specific model, the model is in
parentheses following the feature description. The waveform monitors offer the
following features:
H
Two 270 Mbit serial component loop-through inputs
H
Digital video standards SMPTE 259M, ITU-R BT.656, and ITU-R BT.601
H
RGB and Y-P
B
-P
R
display format for 525 and 625 line signals
H
Eye Pattern display with Timing and Voltage Cursors (WFM 601E,
WFM 601M)
H
Jitter demodulator with numeric jitter readout and video correlated jitter
waveform display (WFM 601M)
H
Parade or Waveform display of Y, P
B
, and P
R
component signals
H
RGB and composite Gamut checks with Diamond and Arrowhead displays
H
Field, line, and word select with readout and bright up of selected lines on
Picture Monitor Out (Y or G Channel) (WFM 601E, WFM 601M)
H
SMPTE RP-165 standard EDH indicator for presence
H
Digital Waveform and Data displays with Data-cursor correlation between
display modes (WFM 601M)
H
Embedded Audio indentification
H
Source-level meter and cable-length readout (WFM 601E, WFM 601M)
Features