Installation
5.
Check that RS232 is set to
ON
. If it is not, highlight
ON
in the RS-232 menu
to turn it on.
6.
Press the
BaudRate
button and turn the general knob to set the desired baud
rate.
7.
Press the
Return
button three times to return to the main menu.
Upgrade the
fi
rmware through the USB port
The USB port allows you to upgrade the instrument
fi
rmware using a USB
memory device. To upgrade the
fi
rmware using the USB port, do the following:
1.
From a computer with an internet connection, download the
most recent instrument
fi
rmware from the Tektronix Web site at
www.tektronix.com/downloads onto a USB memory device. Note the
fi
rmware version.
2.
Press the
Utility
button from the instrument main menu.
3.
Select
System
>
About
.
4.
Look at the instrument display screen and verify that the
fi
rmware version
shown is older than the
fi
rmware version you downloaded from the Tektronix
Web site.
5.
Insert the USB memory device into the USB port on the front panel of the
instrument.
6.
Check that the
Firmware Update
menu option becomes active after
approximately 10 seconds as the instrument recognizes the USB memory
device.
7.
Press the
Firmware Update
button. A dialog box will appear asking if you
want to update the
fi
rmware.
8.
Use the arrow keys to highlight
Yes
if you want to start the update process, or
No
if you want to cancel the process.
9.
Press the
Enter
button to start the update process (or cancel it if you selected
No).
6
TSG4100A Series RF Signal Generators User Manual
Содержание TSG4102A
Страница 1: ...xx TSG4100A Series RF Signal Generators ZZZ User Manual P071315002 071 3150 02...
Страница 2: ......
Страница 16: ...Preface xii TSG4100A Series RF Signal Generators User Manual...
Страница 87: ...Reference Reference Phase noise and offset diagrams TSG4100A Series RF Signal Generators User Manual 71...
