Tektronix TSG4102A, Руководство пользователя

Страница: 13 / 99

Preface
Preface
This manual describes the installation, operation, and related signal concepts of
the TSG4100A Series RF Signal Generators. This manual supports the following
instruments
TSG4102A
TSG4104A
TSG4106A
NOTE.
Check the Tektronix Web site for updates to this manual, which will include
more information about your product. Visit www.tektronix.com/manuals.
For compliance, environmental, and safety information, see the TSG4100A Series
RF Signal Generators Installation and Safety Instructions that shipped with
your instrument. The document can also found on the Tektronix Web site at
www.tektronix.com/manuals.
Key features
The TSG4100A Series RF Signal Generators provide waveform generation and
support both analog (standard) and vector/digital (optional) modulation. The
instruments use a new technique to provide spurious free outputs with low phase
noise (-113 dBc/Hz at20 KHz offset from 1 GHz carrier) and extraordinary
frequency resolution (1
μ Hz at any frequency). An ovenized SC-cut oscillator
(M00 or E1 optioned models) timebase provides 100 times improvement in
stability (and a 100 times reduction in the in-close phase noise) compared to
instruments that use a TCXO time-base. Key features include:
True DC to 2 GHz, 4 GHz, or 6 GHz
Typical ±0.30 dB amplitude accuracy (0 dBm CW signal at 22 ºC) from
100 MHz to 6 GHz
Dual baseband ARB generators
Analog modulation
Soft key to vector modulation upgrade
I/Q modulation inputs (400 MHz RF BW)
ASK, FSK, MSK, PSK, QAM, VSB, and custom I/Q
TSG4100A Series RF Signal Generators User Manual ix