Tektronix TSG 95 Pathfinder, Руководство пользователя

Страница: 28 / 83

TSG 95 Pathfinder

User Manual
17
Reference
This section discusses several aspects of the TSG 95 that are manipu-
lated or configured through the Utility menu. Important topics that
are not discussed elsewhere in this manual include:
H
Editing the User signal set, page 20
H
Selecting User tone frequencies, page 23
H
Audio Tone Level CAUTIONs, page 24
H
Factory Reset, page 26
The Utility Menu
To enter the Utility menu, hold the Lock Out button down while
pressing the ON button. To exit the Utility menu and resume normal
operation, press any of the rectangular buttons at the top of the key-
pad, or scroll to the EXIT MENU item and press
Enter .
The Utility menu items are listed below. Use the up (
Y
) and down
(
B
) arrow keys to scroll up and down the list. Note that there are two
submenus: Calibration (CALIB) and Diagnostic (DIAGN). These
submenus are discussed in separate sections, below.
Y
B
A "
1. Standard/Signal Set select; use the
A
or
"
key to select the de-
sired set of signals. The choices are: PAL, NTSC, NTSC JAPAN
(which includes NTSC signals with 0% Setup), and USER SIG
SET.
Y
B
2. This item permits construction or editing of a custom “User Sig-
nal Set” that can contain up to 26 signals chosen from a list of all
the signals that the TSG 95 can generate. Thus you can create a
User signal set that has both PAL and NTSC signals. Or you can
TSG 95 Pathfinder

User Manual
17
Reference
This section discusses several aspects of the TSG 95 that are manipu-
lated or configured through the Utility menu. Important topics that
are not discussed elsewhere in this manual include:
H
Editing the User signal set, page 20
H
Selecting User tone frequencies, page 23
H
Audio Tone Level CAUTIONs, page 24
H
Factory Reset, page 26
The Utility Menu
To enter the Utility menu, hold the Lock Out button down while
pressing the ON button. To exit the Utility menu and resume normal
operation, press any of the rectangular buttons at the top of the key-
pad, or scroll to the EXIT MENU item and press
Enter .
The Utility menu items are listed below. Use the up (
Y
) and down
(
B
) arrow keys to scroll up and down the list. Note that there are two
submenus: Calibration (CALIB) and Diagnostic (DIAGN). These
submenus are discussed in separate sections, below.
Y
B
A "
1. Standard/Signal Set select; use the
A
or
"
key to select the de-
sired set of signals. The choices are: PAL, NTSC, NTSC JAPAN
(which includes NTSC signals with 0% Setup), and USER SIG
SET.
Y
B
2. This item permits construction or editing of a custom “User Sig-
nal Set” that can contain up to 26 signals chosen from a list of all
the signals that the TSG 95 can generate. Thus you can create a
User signal set that has both PAL and NTSC signals. Or you can