Operating Basics
TSG 95 Pathfinder
User Manual
13
sible, the end character positions will be occupied by symbols.
You will not be able to put characters in those positions until the
message is repositioned to the left.
The V setting can range from ØØ (top of safe area) to 41 (bot-
tom). The vertical interval is indicated by V=vert; it is one
Y
key-press above V=ØØ. Only the first ID message line will fit
into the vertical interval.
3. When the ID message is in the desired position, press any rectan-
gular key to resume normal operation. Note that the position of
an ID message is part of its definition. You must save the ID mes-
sage (see below) to save its new location. If a stored ID or preset
is recalled before the current ID (in its new location) is saved, the
new location will be lost.
Saving ID Messages
The contents and position of the current ID can be stored in one of
eight ID# locations for later recall or inclusion in an ID cycle.
1. Press
Shift
, then
Recall
. The display will change to resemble this
illustration:
The first line of the current message will occupy the bottom half
of the display. You may scroll between the first and second lines
of the message with the
B
and
Y
keys.
2. Use the
A
and
"
keys to select the ID# location (1 through 8) in
which the current message is to be stored. Note that the previous
contents of that location will be overwritten.
3. When the desired storage number is displayed, press
Enter
to save
the message; press any rectangular key to abort the operation and
return the instrument to normal operation.
Recall the message later with the
Recall
key, as described next.
Operating Basics
TSG 95 Pathfinder
User Manual
13
sible, the end character positions will be occupied by symbols.
You will not be able to put characters in those positions until the
message is repositioned to the left.
The V setting can range from ØØ (top of safe area) to 41 (bot-
tom). The vertical interval is indicated by V=vert; it is one
Y
key-press above V=ØØ. Only the first ID message line will fit
into the vertical interval.
3. When the ID message is in the desired position, press any rectan-
gular key to resume normal operation. Note that the position of
an ID message is part of its definition. You must save the ID mes-
sage (see below) to save its new location. If a stored ID or preset
is recalled before the current ID (in its new location) is saved, the
new location will be lost.
Saving ID Messages
The contents and position of the current ID can be stored in one of
eight ID# locations for later recall or inclusion in an ID cycle.
1. Press
Shift
, then
Recall
. The display will change to resemble this
illustration:
The first line of the current message will occupy the bottom half
of the display. You may scroll between the first and second lines
of the message with the
B
and
Y
keys.
2. Use the
A
and
"
keys to select the ID# location (1 through 8) in
which the current message is to be stored. Note that the previous
contents of that location will be overwritten.
3. When the desired storage number is displayed, press
Enter
to save
the message; press any rectangular key to abort the operation and
return the instrument to normal operation.
Recall the message later with the
Recall
key, as described next.
Содержание TSG 95 Pathfinder
Страница 5: ......
Страница 81: ...70 TSG 95 Pathfinder User Manual 70 TSG 95 Pathfinder User Manual ...
