Operating Basics
TSG 95 Pathfinder
User Manual
11
You can pause a sweep at any of its 27 frequency steps (listed in
Table 10 in the Characteristics section) by pressing
Enter
when in
the TONE FREQ menu item and SWEEP 50–20K is selected.
The message SWEEP PAUSED will appear on the display. You
may find this capability useful for checking a problem noticed at
a particular frequency while sweeping. Press
Enter
a second time
to resume the frequency sweep.
3. Tone frequencies are in effect as soon as they are indicated on the
display. Scroll down to other Audio menu items with the
B
key,
or exit the menu by pressing any rectangular key.
Setting the Audio Tone Level (Amplitude)
1. In the Audio menu, use the
B
or
Y
key to reach the TONE
LEVEL item.
2. Use the
A
and
"
keys to select the desired level. When manufac-
tured, the four TSG 95 tone levels are designated as –10, 0, +4,
and +8 dBu and calibrated to those amplitudes. Qualified techni-
cians may rename and recalibrate the tone levels to any integer
value in the ranges of –10 to –3 dBu and 0 to +10 dBu. See page
24 for more information; see the optional Service manual for
instructions.
3. The new tone level will be in effect immediately. Scroll to other
Audio menu items with the
B
or
Y
key, or exit the menu by
pressing any rectangular key.
Inserting Channel–ID Clicks in the Audio
When click is enabled, the instrument will insert a single click into
channel 1, and a double click into channel 2.
1. In the Audio menu, use the
B
or
Y
key to reach the CLICK item.
2. Use the
A
and
"
keys to toggle the ID clicks On/Off.
3. Scroll to other Audio menu items with the
B
or
Y
key, or exit the
menu by pressing any rectangular key.
Inserting ID Messages
H
Toggle the ID message or cycle on and off by pressing the
ID
On/Off
key. The status of the ID — on, off, or cyc (cycle) —is
Operating Basics
TSG 95 Pathfinder
User Manual
11
You can pause a sweep at any of its 27 frequency steps (listed in
Table 10 in the Characteristics section) by pressing
Enter
when in
the TONE FREQ menu item and SWEEP 50–20K is selected.
The message SWEEP PAUSED will appear on the display. You
may find this capability useful for checking a problem noticed at
a particular frequency while sweeping. Press
Enter
a second time
to resume the frequency sweep.
3. Tone frequencies are in effect as soon as they are indicated on the
display. Scroll down to other Audio menu items with the
B
key,
or exit the menu by pressing any rectangular key.
Setting the Audio Tone Level (Amplitude)
1. In the Audio menu, use the
B
or
Y
key to reach the TONE
LEVEL item.
2. Use the
A
and
"
keys to select the desired level. When manufac-
tured, the four TSG 95 tone levels are designated as –10, 0, +4,
and +8 dBu and calibrated to those amplitudes. Qualified techni-
cians may rename and recalibrate the tone levels to any integer
value in the ranges of –10 to –3 dBu and 0 to +10 dBu. See page
24 for more information; see the optional Service manual for
instructions.
3. The new tone level will be in effect immediately. Scroll to other
Audio menu items with the
B
or
Y
key, or exit the menu by
pressing any rectangular key.
Inserting Channel–ID Clicks in the Audio
When click is enabled, the instrument will insert a single click into
channel 1, and a double click into channel 2.
1. In the Audio menu, use the
B
or
Y
key to reach the CLICK item.
2. Use the
A
and
"
keys to toggle the ID clicks On/Off.
3. Scroll to other Audio menu items with the
B
or
Y
key, or exit the
menu by pressing any rectangular key.
Inserting ID Messages
H
Toggle the ID message or cycle on and off by pressing the
ID
On/Off
key. The status of the ID — on, off, or cyc (cycle) —is
Содержание TSG 95 Pathfinder
Страница 5: ......
Страница 81: ...70 TSG 95 Pathfinder User Manual 70 TSG 95 Pathfinder User Manual ...
