Tektronix TLA 714, Руководство по обслуживанию

Страница: 88 / 159

TLA 714 Color Portable Mainframe Service Manual
4–41
Fixed Hard Disk Drive Removal and Installation
These instructions direct you to remove or install a fixed hard disk drive. A fixed
hard disk drive is available through the TLA 7UP mainframe upgrade kit.
Contact your Tektronix representative for more information.
Prior to performing these procedures, use the Windows Back Up tool to back up
any user files stored on the present hard disk drive. Use the backup media that
was shipped with the instrument to reinstall the operating system and applica-
tions.
For further information on software backup and installation, refer to the
TLA 714 and TLA 720 Logic Analyzer Installation Manual.
These instructions assume that you are familiar with servicing the instrument.
Contact your nearest Tektronix, Inc., Service Center or Tektronix Factory Service
Center for installation assistance.
CAUTION.
To prevent static discharge damage, service the instrument only in a
static-free environment.
Observe standard handling precautions for static-sensitive devices while
installing this kit.
Always wear a grounded wrist strap, grounded foot strap, and static-resistant
apparel while installing this kit.
These instructions must be performed in the sequence in which they are
presented; they include the following procedures:
H
Disassembly, which removes the external parts needed to access the location
for the fixed hard disk drive inside the portable mainframe.
H
Fixed Hard Disk Drive Installation, to install the fixed hard disk drive.
H
Reassembly, which reinstalls parts removed in Disassembly.
This section contains procedures for removal and installation of all mechanical
and electrical field-replaceable parts.