manualshive.com logo in svg

Tektronix TLA 714, Руководство по обслуживанию, Страница: 13 / 159

Поделиться
Скачать
Tektronix TLA 714 Скачать руководство пользователя страница 13

General Safety Summary

viii

TLA 714 Color Portable Mainframe Service Manual

Provide Proper Ventilation.

 Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

Terms in this Manual.

 These terms may appear in this manual: 

WARNING.

 Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION.

 Caution statements identify conditions or practices that could result in

damage to this product or other property.

Terms on the Product.

 These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read the
marking.

WARNING indicates an injury hazard not immediately accessible as you read the
marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product.

 The following symbols may appear on the product:

 

Protective Ground

(Earth) Terminal

CAUTION

Refer to Manual

Double 

Insulated

WARNING

High Voltage

Symbols and Terms

Содержание TLA 714
































































































































































Отзывы:

Нет отзывов