manualshive.com logo in svg

Tektronix TDS 410A, Руководство по программированию

Поделиться
Скачать
Tektronix TDS 410A Скачать руководство пользователя страница 230

Command Descriptions

2–212

TDS Family Oscilloscope Programmer Manual

DELEte:SETUp, RECAll:SETUp, *RCL, *SAV

SAVe:SETUp { <NR1> | <file path> }

<NR1>

SAVe

:

SETUp

<Space>

<file path>

<NR1>

 is a value in the range from 1 to 10 and specifies a location. Using an

out-of-range value causes an execution error. Any settings that have been stored
previously at this location will be overwritten.

<file path>

 (available on instruments with the Option 1F File System) is a

quoted string that defines the file name and path. Input the file path using the
form 

<drive>/<dir>/<filename>

. 

<drive>

 and one or more 

<dir>

s are

optional. If you do not specify them, the TDS will write the file to the default
directory. 

<filename>

 stands for a filename of up to 8 characters followed by a

period (“.”) and the 3-char extension “

SET

”. The TDS will generate an error if

you use any other extension for saving a setup.

Settings saved in one TDS oscilloscope may or may not work on a different
model TDS or on the same model TDS with a different version of firmware.

SAVE:SETUP 5

saves the current front-panel setup in memory location 5.

SAVE:SETUP TEK00000.SET

saves the current front-panel setup to the file 

TEK00000.SET

 in the default

directory and on the default drive.

SAVe:WAVEform (No Query Form)

Stores a waveform in one of four reference memory locations or a mass storage
file (on instruments with the Option 1F File System). This command is
equivalent to selecting either the Save Waveform or the Save to File Waveform
item in the Save/Recall Waveform menu.

Save and Recall

DELEte:WAVEFORM, SAVE:WAVEform:FILEFormat

SAVe:WAVEform <wfm>,{ REF<x> | <file path> }

Related Commands

Syntax

Arguments

Examples

Group

Related Commands

Syntax

Содержание TDS 410A































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды