Tektronix SDA601, Руководство по обслуживанию

Страница: 25 / 132

Operating Information
SDA 601 Serial Digital Analyzer 2- 3
H
After three minutes with no key press, the LCD back light will be dimmed to
save battery charge. (This may be disabled through the Utility/Diagnostics/
Power Manage menu; see page 2--12.)
H
To guard against battery discharge if you forget to turn the SDA601 off,
enable Auto Power Off through the Utility/Diagnostics/Power Manage menu
(see page 2--11).
H
The SDA601 can sense low battery voltage. It will warn you when the
charge is sufficient for approximately ten more minutes of operation. The
instrument will shut itself down when the battery voltage becomes too low
for reliable operation
The ON key toggles instrument power On and Off.
NOTE
. If the instrument is operating with low batteries, it may turn itself off and
on. The batteries should be replaced or recharged depending on battery types.
Connecting the SDA601
Figure 2- 2: Connecting the SDA601
Connect the instrument as shown in Figure 2--2. The OPTION connector is
reserved for later versions of the instrument. Note that the SDA601 has many
capabilities and features, and you may wish to gain familiarity with it by first
connecting it directly to a serial digital, component video signal generator such
as the Tektronix TSG601, an analog video monitor, and—if convenient—a
compact printer, such as the Seiko DPU 411 printer (Tektronix part number
119-4594-00), available from Tektronix distributors and through TekDirect.