Installation
Starting the RF Scout Application
If purchased with preloaded software, RF Scout starts automatically when you power on the instrument. If RF Scout does not start
automatically, or you have stopped the application, use either of the following methods to start the application:
Double-tap the
RF Scout
icon on the
instrument screen
Select
Start > Programs > NetTek >
RF Scout
The instrument opens the RF Scout application.
The Microsoft WindowsCE taskbar displays a
button for each running application. To bring
the RF Scout to the front of the screen, tap the
RF Scout
button in the taskbar.
NOTE.
You cannot run RF Scout application at the same time as the YBT250 application. However, you can run RF Scout and the
YBA250 application module measurements at the same time as long as you are not measuring Insertion Gain/Loss.
10
RF Scout Quick Start User Manual
