Tektronix Profile Pro II Скачать руководство пользователя страница 324 | Manualshive

Страница: 324 / 370

Chapter 10 Using TimeDelay

324

Profile PRO Series

Configuring Channels with Resource Manager

The Resource Manager is used for creating and configuring all TimeDelay
channels. In TimeDelay, the first channel (labeled “Recorder” in Figure 167) is
always the record channel, and all other channels are playback channels. You
cannot remove the first two channels because TimeDelay always requires a
record channel and at least one playback channel. You can have as many as 6
playback channels.

For more detailed information about using Resource Manager, refer to “Using
the Resource Manager” on page 291.

Adding a Playback Channel

To add a playback channel:

1. Choose

Config | Resource Manager…

to open Resource Manager.

2. Click the

Add Channel

button. This creates a new channel tab in the

Resource Manager dialog box.

3. Configure the new channel as necessary. Instructions for using Resource

Manager are in “Using the Resource Manager” on page 291.

4. Click the

OK

button.

When you close the Resource Manager dialog box, a new playback panel is
displayed in the TimeDelay window.

Deleting a Playback Channel

To remove a playback channel:

1. Choose

Config | Resource Manager…

to open Resource Manager.

2. Click on the channel tab that you want to remove.

3. Click the

Remove Channel

button to delete the selected channel tab.

4. Click the

OK

button.

When you close the Resource Manager dialog box, the panel that corresponded
to the removed channel is no longer displayed in the TimeDelay window.

«
...
322
323
324
325
326
...
»

Содержание Profile Pro II



















































































































































































































































































































































































Отзывы:

Нет отзывов