Tektronix Profile Pro II Скачать руководство пользователя страница 114

Страница: 114 / 370

Chapter 3

Using Media Manager

114

Profile PRO Series

Deleting Clips and Masters

When a clip or master is deleted, it is just moved to the

Recycle

bin. It is

permanently deleted when the

Recycle

bin is emptied.

To delete a clip or master:

1. Select the clip or master in the contents pane.

2. Press

Delete

Backspace

, or choose

Delete

on the

File

menu or from the

shortcut menu with the right-click. Press

Shift-Delete

to skip the

Recycle

bin and delete the material immediately.

3. The clip or master icon disappears from the tree and is moved to the

Recycle

bin.

Emptying the Recycle Bin

When a clip or master is deleted, it is moved to the

Recycle

bin and is

permanently deleted when the

Recycle

bin is emptied. If an item of the same

name is in the

Recycle

bin, the new item is automatically renamed.

To empty the

Recycle

bin:

1. Select the bin labeled Recycled in the tree pane.

2. Choose

Empty Recycle Bin

with a right-click or from the

File

menu.

To always delete media immediately, avoiding the

Recycle

bin:

1. Select the bin labeled

Recycled

in the tree pane.

2. Choose

Properties

with the right-click or from the

File

menu. The Recycle

Bin Properties dialog box appears (see Figure 48).

3. Click the

Options

check box to enable immediate removal of deleted items.

4. Click

Содержание Profile Pro II



















































































































































































































































































































































































Результаты поиска

Содержание Profile Pro II

Отзывы:

Бренды по названию

Популярные бренды

Tektronix Profile Pro II, Руководство пользователя

Результаты поиска

Содержание Profile Pro II

Отзывы:

Бренды по названию

Популярные бренды