136
Phaser 750 Color Printer
Troubleshooting Phaser 750 Printers
Print quality hints
To ensure the best print quality and the most reliable printer operation, follow these
simple guidelines:
■
Use high-quality paper and
only
Tektronix transparencies and glossy coated paper.
■
Do not use any media designed for inkjet printers, especially inkjet coated paper and
inkjet transparencies. Inkjet media are coated with a substance that may damage the
Fuser; Tektronix does not furnish warranty service for damage or malfunction caused
by the use of non-Tektronix supplies or consumables. Tektronix coated paper and
transparencies have been specially designed for use with Tektronix Color Laser
Printers.
■
Double-sided printing and specialty media will require more frequent cleaning of the
rollers and will reduce the average life of the consumables.
■
Auto-duplex only with laser bond paper that is 75 - 90 g/m
2
(20 - 24 lb.). Do not use
paper that is lighter than 75 g/m
2
(20 lb.); it is not opaque enough for acceptable
duplex prints.
■
Use only laser paper for automatic double-sided printing with the Duplex Unit.
■
Keep the Imaging Unit’s light exposure to a minimum — less than 90 seconds of
artificial light and no exposure to sunlight — or you may damage the unit:
■
When installing a new Imaging Unit, keep the protective plastic sheet on until
immediately before inserting the unit.
■
If, when installing the Imaging Unit, you also need to install other components,
install the Imaging Unit
last
to minimize its light exposure.
■
When changing a Toner Cartridge or clearing a media jam, make sure that you
close the printer’s right side door quickly to avoid any light exposure to the
Imaging Unit.
■
Do not leave the printer’s front door open for extended periods of time (for
example, several hours).
■
Do not touch the underside or the right side of the Imaging Unit; fingerprints may
appear on your output.
Содержание PHASER 750
Страница 70: ...70 Phaser 750 Color Printer Color Density ...
