Tektronix OM4006D, Руководство пользователя

Страница: 84 / 205

Con fi guring the OM4000 user interface (OUI)
When connecting from the OUI, you will see a check box for VISA. Do not check
the box unless you require a VISA connection.
NOTE.
Clicking Connect on the OUI Setup Tab opens the Scope Connection
dialog box for connecting to the Scope Service Utility.
The green bar at the top indicates that the software is searching for oscilloscopes
on the same subnet that are running the Scope Service Utility. As they are found
they are added to the drop-down menu. If the OUI Scope Connection Dialog box
reports 0 Scopes Found, you will have to type in the IP address manually. This
happens when connecting over a VPN or when network policies prevent the IP
broadcast. When typing the address in manually, do not include “, ET” or “,
RT” on the end. Click
Connect .
After connection, map the channels to the physical receiver channels and
corresponding MATLAB variables as shown. This means that data from the
selected channel will be moved into the indicated Vblock variable. Vblock(1) is
X-Inphase, Vblock(2) is X-Quadrature, Vblock(3) is Y-Inphase, Vblock(4) is
Y-Quadrature. The mapping you choose will depend on the cable connections
made to the receiver.
60 OM4000D Series Coherent Lightwave Signal Analyzer