Tektronix IsoVu TIVP Series, Руководство пользователя

Страница: 16 / 57

Important safety information
This manual contains information and warnings that must be followed by the user for safe operation and to keep the product
in a safe condition.
To safely perform service on this product, see the Service safety summary that follows the General safety summary.
General safety summary
Use the product only as specified. Review the following safety precautions to avoid injury and prevent damage to this
product or any products connected to it. Carefully read all instructions. Retain these instructions for future reference.
The product is designed to be used by trained personnel only.
Before use, always check the product with a known source to be sure it is operating correctly.
To avoid fire or personal injury
Connect and disconnect properly
Do not connect or disconnect sensor tip cables, test leads, or accessories while they are connected to a voltage source.
Use only test leads and accessories supplied with the product, or indicated by Tektronix to be suitable for the product.
Use only insulated voltage probes, test leads, and adapters supplied with the product, or indicated by Tektronix to be
suitable for the product.
Observe all terminal ratings
To avoid fire or shock hazard, observe all rating and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
Do not exceed the Measurement Category (CAT) rating and voltage or current rating of the rated individual component of a
product or accessory. Do not apply a potential lowest that exceeds the maximum rating.
The measuring terminals on this product are not rated for connection to mains or Category II, III, or IV circuits.
Do not operate without covers.
Do not operate this product with covers or panels removed, or with the case open. Hazardous voltage exposure is possible.
Avoid exposed circuitry
Do not touch exposed connections and components when power is present.
Do not operate with suspected failures
If you suspect that there is damage to this product, have it inspected by qualified service personnel.
Disable the product if it is damaged.
Do not operate in wet/damp conditions
Do not operate in an explosive atmosphere
Keep product surfaces clean and dry
Clean with dry cloth only
Important safety information
TIVP Series IsoVuTM Measurement System User Manual xvi