2-45
Installation
Refer to
for the correct module installation
locations. The Analog Input Modules are installed into Slots D-10 through D-17 of
the D Bay. The Serial Reentry Modules are installed into cells C8, and C10–C12 of
the C Bay where the optional Serial Input Modules would normally be installed.
The following component analog video formats can be connected to the Analog
Input Modules.
■
RGB (50 or 60 Hz, SU or NSU)
■
Betacam
■
MII (50 or 60 Hz)
■
SMPTE
■
EBU
(The component analog video specifications are located at the end of Section 1,
System Overview)
The parameters for Analog Video Inputs, Analog Key Inputs and Analog Input
Timing must be defined for each input in the configuration menus. These menus
appear in Confg/Inputs/Anlg Video Inputs/Anlg Key Inputs/Anlg Input
Timing. Refer to the Model 4000 User’s Guide (TP0790) and Operation Reference
(TP0764) Manuals for detailed information.
Table 2-5. Analog Input Module and Serial Reentry Module Locations
Analog Input
Module Locations
Serial Reentry Module Locations
Analog Input 1–Slot D-17
Analog Input 2–Slot D-16
Serial Reentry Module–Slot C12 (Serial Input Module 5 location)
Analog Input 3–Slot D-15
Analog Input 4–Slot D-14
Serial Reentry Module–Slot C11 (Serial Input Module 6 location)
Analog Input 5–Slot D-13
Analog Input 6–Slot D-12
Serial Reentry Module–Slot C10 (Serial Input Module 7 location)
Analog Input 7–Slot D-11
Analog Input 8–Slot D-10
Serial Reentry Module–Slot C8 (Serial Input Module 8 location)
Содержание Grass Valley 4000
