Example 3: Reset the BER and Resyncs to zero
Example 3: Reset the BER and Resyncs to zero
This example assumes that you have completed steps in this Examples 1 and 2 and that the instrument has achieved
synchronization.
1.
Touch the
Run
on the Control console
two times to start and stop the detector.
The button changes color when the
instrument is running.
2.
Touch the
Reset Results
button at
the top of the screen to reset the
measurement results.
3.
Check the Detector view for the following:
The clock rate (
1,000.00 Mbit/s
)
matches the 1 GHz rate being
transmitted by the Generator.
The data type is set to PBRS-7.
The Detector Results box indicates
zero BER and zero resyncs.
Tektronix BERTScope Bit Error Rate Analyzers Quick Start User Manual
19
