Tektronix AVG1, Руководство пользователя

Страница: 49 / 146

AVG1 Analog Video Generator User Manual
3- 5
Functional Command Groups
This section describes the commands in general categories. Commands to the
module are divided into the following groups:
H
MMEMory (see TG 2000 Signal Generation Platform User Manual )
H
OUTPut
H
SENSe
H
SOURce
Items followed by question marks are queries; items without question marks are
commands. Some items in this section have a question mark in parentheses (?) in
the command header section; this indicates that the item can be both a command
and a query.
MMemory
Two MMEMory commands are listed here for your reference. You can use these
to set and query the output test signal for the module. Detailed information for
using these commands (as well as other commands that can be used with the
entire platform) are located in the
TG 2000 Signal Generation Platform User
Manual
.
Table 3- 1: :MMEMory commands
Command Description
:MMEMory:LOAD:SIGNal Load a signal into a module and identify that signal as the active
signal (output signal) for that module
:MMEMory:SIGNal:ACTive? List the active signal (output signal) for a module