Tektronix AVG1, Руководство пользователя

Страница: 46 / 146

Syntax
3- 2
AVG1 Analog Video Generator User Manual
MINimum. Use this argument to set the parameter value to the minimum
acceptable value.
MAXimum. Use this argument to set the parameter value to the maximum
acceptable value.
DEFault.
Use this argument to set the parameter value to the default value.
The following example demonstrates the effect of each argument used with a
step value.
1. :INSTrument:SELect ”AVG1:#” selects the analog video generator module
located in the slot number indicated by the “#” symbol.
2. :OUTPut:STATe ON enables the module and displays the loaded test signal.
3. :OUTPut:CIRCle:STATe ON displays a circle on the video display.
NOTE
. :OUTPut:CIRCle:DIAMeter uses an argument that is the percent of
picture height.
4. :OUTPut:CIRCle:DIAMeter DEFault sets the circle diameter to 90 percent
of the screen height.
5. :OUTPut:CIRCle:DIAMeter:STEP 10 sets the step increment to 10 percent.
6. :OUTPut:CIRCle:DIAMeter DOWN changes the circle diameter to
80 percent of the screen height.
7. :OUTPut:CIRCle:DIAMeter 50 changes the circle diameter to 50 percent of
the screen height.
8. :OUTPut:CIRCle:DIAMeter MAXimum changes the circle diameter to
100 percent of the screen height.
9. :OUTPut:CIRCle:DIAMeter MINimum changes the circle diameter to
0 percent of the screen height.
10. :OUTPut:CIRCle:DIAMeter UP changes the circle diameter to 10 percent of
the screen height.
Argument Example