Calls Screen
Answering and Placing Calls on Master Stations
The NC404TS, NC415AV, NC402TS, and NC401VFD Master Stations are all capable of answering and
placing calls within the facility.
To talk to the station that placed a call, simply lift the handset of the applicable master station and begin
speaking. Picking up the handset or pressing the talk button will automatically answer the first call in the
list. If more than one call is displayed, touch or scroll to the call you wish to answer to select it before lift-
ing the handset or pressing the
TALK
button. If you wish to use the push-to-talk feature instead of using
the handset, press and hold the
TALK
button on the master station. Release the
TALK
button to listen.
Once the call is complete, either hang up the handset on the master station or press the
RESET
button.
Password Protection
Some features may be password protected. If there is an icon with a key on the top of the screen, enter the
password to view or edit a page. If you do not know the password, contact a facility administrator or tech-
nician.
Touch the key at the top left corner of the screen. Enter the password on the keyboard screen and
press the key next to the password.
Once the password is entered correctly, the background of the key will turn yellow.
Tone Silence
All low priority calls can be silenced with the tone silence icon on any master station.
The tone silence icon will show at the upper right corner of the screen. The gray background
indicates low priority calls are not silenced.
Once the icon has been pressed, the background of the icon will turn yellow and the tone for the
call will silence. Select this option for each low priority call you wish to silence. Select the icon
again to remove the tone silence.
If
the
tone
silence
feature
is
enabled
and
a
new
low
priority
call
or
fault
comes
in,
the
new
call
will
not
be
silenced
until
the
tone
silence
icon
is
pressed
again.
This
feature
will
retain
the
assigned
tone-off
calls
that
have
already
been
silenced.
Fault
If
fault
filters
have
been
selected
,
and
a
fault
is
on
the
system,
a
fault
icon
will
appear
at
the
top
of
the
screen.
Click the icon to see which module has the fault. Once the fault is corrected, the icon will dis-
appear.
8
|
IL1068 Tek-CARE Master Station User Guide
Copyright
©
TekTone Sound and Signal Mfg., Inc. All Rights Reserved
