Dial Screen
Staff Rounding
With the staff rounding feature enabled via the facility technician, facilities can set schedules and reminders
for rounds. This feature allows the nurse call system to register when a staff member enters a patient or res-
ident room during their scheduled time period and presses the designated rounding button all in a timely
manner.
If the rounding feature is available for the facility, touch
Dial
and enter the station or select the station icon.
At the bottom, select Settings. On the
Station Settings
page, touch the arrow next to
Audio
and select
Rounding
to select a rounding schedule for the station. Select the applicable rounding schedule for the sta-
tion. Touch
None
at the bottom of the screen if none of the rounding schedules should be selected for that
station.
To create additional rounding schedules, please contact the facility technician for more information.
Touch
Check-In
to see what days and times the patient has to check-in. Typically, assisted living facilities
use this feature. If the resident doesn't check-in on the station located in his/her room, an inactivity alarm
will appear on the system.
Touch
None
at the bottom of the screen if none of the check-in schedules should be selected for that sta-
tion.
Touch
Vacation
at the bottom of the screen to turn off the check-in if the resident will be absent from the
facility. To remove the station from vacation mode, either touch
Vacation
again or go to the patient station
and press
Reset
.
Touch the blue arrow next to
Check-In
to add the station to zones and select the appropriate call types for
that station.
16
|
IL1068 Tek-CARE Master Station User Guide
Copyright
©
TekTone Sound and Signal Mfg., Inc. All Rights Reserved