Dial Screen
Dial Screen
Touch the
Dial
button to access the
Dial
screen. Enter the station ID.
Touch the
Search
button to open the
Call Details
page.
Once on the
Call Details
page, you can use the buttons to place statuses on the station, attend calls, and
other options.
A
Stat
call can be used as a staff emergency. Touch
Stat
if there is an emergency for the patient in the
room with that station. Stat can only be reset at either the station itself, the NC402TS, NC404TS,
NC415AV, or on the NC404L sidecar. To clear this option at the master station, select
Stat
, touch
Reset
,
then press the
RESET
button on the sidecar.
L1
,
L2
, and
L3
represent different levels of aid, such as housekeeping or a nurse is needed. Touch any of
the levels of care to send out a request letting assigned staff know how to help the patient. To clear an
L1
through
Attend
, either touch the button on the master station, or go to the room and reset the station.
Status 1
and
Status 2
are created by the facility's technician and can be used depending on the situation
(like a fall risk) which triggers a dome light. Touch either
Status 1
or
Status 2
to either enable or disable
them.
Touch
Send MSG
to send either a preprogrammed or custom message to individuals or a staff group about
the station if a form of messaging has been integrated with the system.
Touch
Settings
to edit the settings for that station.
14
|
IL1068 Tek-CARE Master Station User Guide
Copyright
©
TekTone Sound and Signal Mfg., Inc. All Rights Reserved
