7. Remove the front engine mount nut on the left side of the engine. Take the provided
compressor tensioning bracket, slide onto bolt, and then use the front engine mount bolt to
fasten into place.
8. Take one of the 3/8” x 1 ½” flange bo
lts and nuts and loosely attach the tensioning bracket to
the compressor. See previous photo.
9. Take the provided 31/64
” x
40 3/8
” main drive belt and slip over the main drive, fan and
compressor pulleys. This belt can be fully tensioned at this point. Tighten all fasteners once
proper tension has been applied.
June 2021© New Holland G6030/6035 ROPS Cab Installation Manual
