If cab is equipped with air conditioning option, the following steps can be performed before the
cab is installed.
Air Conditioner Installation Instructions:
1. Disconnect the battery ground. Disconnect the wire harness plugging into the alternator.
2. Remove the muffler assembly to provide better access.
3. Take off main drive shaft from motor and remove drive belt.
4. Un-bolt and remove the alternator from the alternator bracket, and then un-bolt the
alternator bracket from the engine.
5. Take the provided compressor mounting bracket and bolt onto engine where the alternator
bracket used to be installed. Use the original alternator bracket fasteners.
6. Take the compressor and two of the
3/8” x 1 ½” flange bolts and nuts and loosely bolt the
compressor to the mounting bracket installed earlier. Ensure that the fittings will be pointed as
shown in the photo and the compressor is rotated to the position that is shown.
June 2021© New Holland G6030/6035 ROPS Cab Installation Manual
