7
5.
POWER SUPPLY DESCRIPTION
5.1 SETTING THE OUTPUT VOLTAGE
1 Connect the power supply to the power source.
2. Press
the
POWER SWITCH [1]
to “I” position to turn on the power supply.
3. The
CV INDICATOR [5]
and
POWER INDICATOR [3]
* will on and the voltage value will be
displayed on the display.
4. Use
the
VOLTAGE COARSE TUNE KNOB [8]
and
VOLTAGE FINE TUNE KNOB [9]
to adjust and
fine turn the voltage to give a desired output voltage.
5. Connect the circuit to the
MAIN TERMINAL [12, 14].
6. When
the
CC INDICATOR [4]
is on, adjust the
CURRENT COARSE TUNE KNOB [10]
and
CURRENT FINE TUNE KNOB [11]
to give a suitable current.
Caution:
z
Make sure the
INPUT VOLTAGE SELECTOR [19]
set to a correct position. Otherwise, it will
damage the power supply.
z
Do not short the
MAIN TERMINAL [12, 14]
over 1 minute; it will damage the power supply.
