Teknor Industrial Computers VIPer 821, Техническое справочное руководство

Страница: 50 / 106

VIPer 821 - Technical Reference Manual
4-2
Whenever you are not sure about a certain setting, refer to the list of default values. Default
values are provided in the event that a value has been changed and one wishes to restore
original values.
Loading the BIOS or SETUP defaults will affect all the options and will reset options
previously altered. Loading default values at the main menu changes setups for all screens
while loading default values in a particular setup screen will affect only that screen.
BIOS default settings consist of the safest set of parameters. Use it if the system is behaving
erratically. They should always work but do not provide optimal system performance.
SETUP default values provide optimum performance for all devices and system features.
CAUTION
Before modifying CMOS setup parameters, ensure that the Battery jumper is
installed (See Setting Jumpers Section).
The board is capable of operating without the onboard battery if the CMOS
values are saved into the Flash memory.
4.1 BASIC COMMANDS
Operations within each menu and screen are summarized below:
Up arrow (
↑↑↑↑
)
Move to previous item.
Down arrow (
↓↓↓↓
)
Move to next item.
Left arrow (
← ← ← ←
)
Move to the item to the left.
Right arrow (
→
→ →
→
)
Move to the item to the right.
Esc key In Main Menu: Quit settings with saving options.
In sub-menus: Exit and return to Main Menu.
PgUp key Increase the numeric value or make changes.
PgDn key Decrease the numeric value or make changes.
+ key (Numeric keypad) Increase the numeric value or make changes.
- key (Numeric keypad) Decrease the numeric value or make changes.
F5 key Restore the previous setup values.
F6 key Load the default setup values from BIOS Default Table.
F7 key Load the setup values from the Setup Default Table.
F10 key Save all the CMOS changes.