Tekno RC NT48.3, Инструкция по сборке

Страница: 14 / 32

TKR5472
TKR5193
TKR5054A
TKR1445 TKRBB08165
TKR5194
TKR5070
TKR1447
TKR1447
TKR1601
TKR1601
TKR1601
TKRBB13194
TKR1221
TKR1401
TKR1445
TKR5054A
Spindle Pin Sleeve
x4
TKR5055A
Suspension Pin Sleeve
x4
Grease
TKR5073
TKR5073
Step
K-1
Step
K-3
Step
K-2
Thread
Lock
TKR5071
TKR1603
(Option)
*TKR5071B
*TKR5071C
*TKR5071X
TKR1445
M4x14mm Button Head Screw
x4
TKR1447
M4x16mm Button Head Screw
x4
TKR5073
CV Joint Pin
x2
TKR1603
M5x4mm Set Screw
x2
TKRBB13194
Ball Bearing (13x19x4)
x2
TKRBB08165
Ball Bearing (8x16x5)
x2
TKR5071
M3x16.8mm Pin
x2
TKR1601
M3x4mm Set Screw
x8
TKR5055A
Note: The steering stops provide adjustable
travel limiters that you can adjust to your
driving style. For very tight tracks you may
want to experiment with less limiting washers
(more steering travel). However, with too
much steering travel the rear end can lose
traction more easily coming out of corners.
After months of testing on different track
surfaces, 1 washer is the best starting point.
TKR1401
M3x6mm Button Head Screw
x2
Note: The TKR1601 set screws are meant to keep the TKR1445 screws from coming loose. After installing TKR1445
and ensuring the steering action is free, install TKR1601 in the locations indicated. Very slowly tighten the screws
until you feel some resistance from contacting the TKR1445 screws. DO NOT OVERTIGHTEN. Also be sure to loosen
TKR1601 before unscrewing TKR1445 or you will damage the screws and the parts.
TKR5472
TKR5193
TKR5054A
TKR1445 TKRBB08165
TKR5194
TKR5070
TKR1447
TKR1447
TKR1601
TKR1601
TKR1601
TKRBB13194
TKR1221
TKR1401
TKR1445
Grease
TKR5073
TKR5073
Step
K-1
Step
K-3
Step
K-2
ad Thre
ck Loc
TKR5071
TKR1603
(Option)
B *TKR5071
C *TKR5071
X *TKR5071
TKR5055A
Note: The steering stops provide adjustable
travel limiters that you can adjust to your
driving style. For very tight tracks you may
want to experiment with less limiting washers
(more steering travel). However, with too
much steering travel the rear end can lose
traction more easily coming out of corners.
After months of testing on different track
surfaces, 1 washer is the best starting point. surfaces, 1 was e
Note: The TKR1601 set screws are meant to keep the TKR1445 screws from coming loose. After installing TKR1445
and ensuring the steering action is free, install TKR1601 in the locations indicated. Very slowly tighten the screws
until you feel some resistance from contacting the TKR1445 screws. DO NOT OVERTIGHTEN. Also be sure to loosen
TKR1601 before unscrewing TKR1445 or you will damage the screws and the parts.
Bag K
Front Spindle / CVA Assembly
14
Note: notch on pin
needs to line up
with set screw.
TKR1221
M3x8mm Washer
x8
Note: The TKR1601 set screws are meant to keep the TKR1447 screws from coming
loose. After installing TKR1447 and ensuring the steering action is free, install TKR1601
in the locations indicated. Very slowly tighten the screws until you feel some resistance
from contacting the TKR1447 screws. DO NOT OVERTIGHTEN. Also be sure to loosen
TKR1601 before unscrewing TKR1447 or you will damage the screws and the parts.