Tekno RC NT48.3, Инструкция по сборке

Страница: 6 / 32

TKR1525 TKR1525 TKR1525 TKR1525
TKR5012
TKR5012
TKR5428
TKR5075
TKR5405
Front
Rear
TKR1603
TKRBB05114
TKRBB05114
TKR5405
TKR1222
TKR1222
TKR1525 TKR1525
TKR1529
TKR1222
TKRBB05114
TKR1222
TKR1525 x6
TKR5401
TKR1226
TKR1226
TKR5075
TKRBB05114
TKR1525
M3x14mm Cap Head Screw
x6
TKRBB05114
Ball Bearing (5x11x4)
x2
x2
TKR1222
13x16x0.1mm Diff shim
TKR1529
TKR1603
Grease
Note: flat spot
Note: flat spot
TKR1603
M5x4mm Set Screw
x1
TKR1529
M3x20mm Cap Head Screw
x2
TKR1525 TKR1525 TKR1525 TKR1525 TKR1525 TKR1525 TKR1525 TKR15 TKR15 TKR15 TKR15 TKR15 TKR15 TKR15
Fron nt
Rear
TKRBB05114
4 TKRBB0511
05 TKR540
TKR1222
TKR1222
TKR1525 TKR1525
TKR1529 T
TKR1226
TKR5075
TKR1603
Grease
p e: flat spot Note
p flat spot Note: fl
Bag D
Front Gearbox
(overview)
Step
D-1
Step
D-2
Step
D-3
6
Thread
Lock
TKR1226
5x7x0.2mm shim
x1
Note: TKR1222 - The gear mesh should be as close as possible without any binding. Test the fitment of the diff
with both TKR1222 shims on the gear-side of the diff. If the diff turns freely without binding, continue to next
step. If the diff binds and does not turn freely (it will make a grinding or crunching sound when spun), remove
one TKR1222 shim from the gear side and install it onto the other side of the diff. Reassemble and test the mesh
again. If it is still binding, remove the second TKR1222 shim from the gear side and install it onto the other side
of the diff. When you are satisfied that you have the best gear mesh possible continue to the next step.
Note: The front and rear of
the car use different inner
bulkheads. The front is angled
whereas the rear is offset
and only slightly angled.