TEKNIX TKGF61BL, Инструкция по эксплуатации, Страница: 14 / 37

Installing your gas cooker
Bringing it all together
Installing your gas cooker
Gas pipe
Mechaniccal
gas hose
Seal
Mechanical gas
hose
Mechanical
gas hose
WARNING: The Cooker must be installed and
maintained by a suitably qualified gas registered
technician in accordance with current safety legislation.
WARNING: Do not use a naked flame to
check for gas leaks.
Gas conversion
Your appliance is designed to be operated with LPG/
NG gas. The gas burners can be adapted to different
types of gas, by replacing the corresponding injectors
and adjusting the minimum flame length suitable to the
gas in use. For this purpose, the following steps should
be performed:
Changing injectors
Hob burners
• Cut off the main gas supply and unplug the
appliance from the mains electrical supply.
• Remove the burner caps and the adapters.
• Use a 7 mm spanner to unscrew the injectors.
• Replace the injector with the ones from the gas
conversion kit, with the correct diameters for the
type of gas that is going to be used, according to
the gas injector table.
Adapter
Spanner
Adapter
Cup
Burner cap
Oven/Grill (if available) Injectors
Removal of the Cathedral Burner: The burner
protection sheet is fixed with two screws. As shown in
figure 8, use a screwdriver to remove it. As shown in
figure 9, press the spring clip in the direction of the
arrow to remove the burner from the slot. As shown in
figure 10, remove the injector in the bearing with a
socket wrench. In order to re-place the burner,apply
the removal process reversely.
14