manualshive.com logo in svg

Teknion Leverage, Инструкции по установке, Страница: 304 / 516

Поделиться
Скачать
Teknion Leverage Скачать руководство пользователя страница 304

STEP 1: Attach Corner bracket and Anti-Dislodgement Clip before installing Modesty Panel.

STEP 2: Attach Wire Trough onto the worksurface. Secure it using the screws provided.

STEP 3: Attach Worksurface onto the Panel and secure using the screws provided with the

Worksurface.

Section:
Description:

Page No:

Date: 

ATTACH ANTI-DISLODGEMENT CLIP

MOUNT WIRE TROUGH

ATTACH WORKSURFACE TO PANEL

TLE_365

2 of 4

May 2020

MODESTY PANEL

WORKSURFACE SUPPORTS & ACCESSORIES

leverage 

Installation Guides

Anti-Dislodgement
 Clip

NOTE: To Prevent disengagement
of worksurface supports, the Anti
Dislodgement Clip 

must

 be used as

shown once the support brackets
are installed.

A2

A5

NOTE: Wire Trough to be
mounted flush to the rear edge or
inset 7 1/2".

7  1/2"

Содержание Leverage





































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов