manualshive.com logo in svg

Teknion Leverage, Инструкции по установке, Страница: 297 / 516

Поделиться
Скачать
Teknion Leverage Скачать руководство пользователя страница 297

STEP 2:  Remove Upper Brackets from the C-Leg assembly.

STEP 1: Remove Elements from the panels.

STEP 3: Measure and mark the location for the Upper Bracket and secure it using the screws
provided. Once the bracket is installed re-install Elements

Section:
Description:

Page No:

Date: 

REMOVE ELEMENTS

REMOVE UPPER BRACKET

ATTACH UPPER BRACKET

TLE_363

2 of 5

May 2020

INTERMEDIATE C-LEG

WORKSURFACE SUPPORTS & ACCESSORIES

leverage 

Installation Guides

NOTE: For ease of installation remove
T - Bracket from the C-Leg assembly.

NOTE: Depending on the location of
the Bracket, Hole alignment would not
be available for some screws.

Element

A4

A2

A3

A1

A4

A5

A5

A5

Содержание Leverage





































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов