105-0717-006 20
SKU 13061 EUROLOCK VERSION CHUCK ONLY
The Titan III EUROLOCK locking ring fixing system is a safety standard for European
lathes and chucks. The EUROLOCK chuck conforms to the European safety
standards for securing the chuck to the lathe by using the locking ring and is
compatible with both the new M33 Ring spindle and the M33 Standard spindle.
The Locking Ring supplied by the lathe maker
IMPORTANT!
Release the Grub screw before removing the chuck.
Installation Instructions:
Step 1:
Tighten the EU chuck to the spindle
on the lathe, make sure the rings on the
spindle and chuck have been clamped.
Step 2 & 3:
Put the upper and lower part of
locking ring under the clamped rings as
shown.
Step 4:
Using an 8mm Allen key, fasten the
two bolts on the locking ring.
