Teknatool nova PRO-TEK SUPERNOVA2 Скачать руководство пользователя

Страница: 4 / 41

Welcome

Thank you for purchasing our NOVA PRO-TEK SUPERNOVA

geared chuck. It is a new

addition to our NOVA woodturning chuck range with advanced features to enhance

your chuck use. It provides a versatile and easy method for fast and secure work

holding for all face turning – bowls, platters, egg cups, vases, boxes, goblets, and an

endless variety of similar projects.

The NOVA PRO-TEK SUPERNOVA

Chuck combines the best features of our NOVA

Chuck, SUPERNOVA

Chucks, and similar woodturning chucks (wide jaw movement,

quick two-way grip) with the advantages of the latest technology and inNOVAtion

from Teknatool.

As a valued customer, we would be pleased to hear from you and how you found

your PRO-TEK SUPERNOVA

Chuck. Any comments on the chuck or accessory ideas

would be very welcome so that we can continue to offer what we believe is the best

woodturning chucking system available.

Benefits of NOVA PRO-TEK SUPERNOVA

Chuck

•

Premium rust-resistant nickel-plated body for longer protection and less

maintenance.

•

Stronger and more versatile 50mm/2” PRO-TEK Jaws with an improved dovetail

AND serrated profile for maximum control. The unique woodworking dovetail

profile pulls the project into the chuck and holds round and square blanks more

firmly.

•

Upgraded 6-point star fasteners exerting more torque with ease, offering better

holding power and minimizing strip out for longer life.

•

New Star T-Bar Handle for easy grip and quicker tightening of screws.

•

Precision laser etched jaw numbering allowing ease of jaw and slide alignment,

positioning and change out.

•

CNC precision machined for unparalleled tolerances and accuracy.

•

Powerful Geared Grip delivers tremendous holding power.

•

Copper-infused, precision-cast jaw slides for effortless movement and

resistance to wear and tear.

•

Single-handed operation offers fast and convenient mounting for your project:

quicker setup equals more time to turn.

•

Intuitive clockwise scroll rotation for ease of use.

•

Auto Safety Stop Feature to keep Jaw slides from protruding past the chuck

body.

Содержание nova PRO-TEK SUPERNOVA2










































Результаты поиска

Содержание nova PRO-TEK SUPERNOVA2

Отзывы:

Похожие инструкции для nova PRO-TEK SUPERNOVA2

Бренды по названию

Популярные бренды

Teknatool nova PRO-TEK SUPERNOVA2, Руководство по эксплуатации

Результаты поиска

Содержание nova PRO-TEK SUPERNOVA2

Отзывы:

Похожие инструкции для nova PRO-TEK SUPERNOVA2

Бренды по названию

Популярные бренды