Teknatool nova ORION 55250, Руководство по эксплуатации

Страница: 25 / 38

25
128-1019-004
Swivelling the Headstock
Loosen the headstock lock pin to free
headstock.
➢
Note: Use the operating bar to provide more
leverage then loosening the headstock lock
pin as it can become tighter over time.
Push the detent lever towards the right-hand
side and hold it in position.
Turn the headstock to the desired position.
NOVA Orion lathe has the headstock locking
positions at the following angles:
Positive Negative
22.5° -45
45°
90°
180°
Push the detent lever back to the left-hand
side once the headstock is approximately in
the desired position. Turn the headstock left
and right to ensure the detent pin is properly
engaged with the headstock.