9
128-1019-004
Attaching the Headstock onto the Bed
SAFETY CAUTION
:
The headstock unit itself has a significant mass
(Approximately 50Kg) therefore extreme caution must be taken to lift the headstock up to a
height where it can be attached to the bed
.
Insert the centre pin of the headstock into the bore of the lathe bed to mount the headstock.
Align the lathe bed mounting holes
with the slots on the stand legs
before inserting the bolts.
Make sure the bed side edge
matches the machined surface
edge of the stand
The direction of the set screw on
the headstock centre pin must
match the slot on the lathe bed
bore where it gets inserted.
Содержание nova ORION 55250
Страница 36: ...36 128 1019 004 NOVA Orion Headstock Breakdown...