Example of Shop-made Lathe Stand
297 mm
(11-11/16 in.)
to suit
turner
Top
43 x 16 x 2 in.
plywood bottom
(compartment for sand)
Lower Rail (2)
1-1/2 x 7-1/2 x 33 in.
Leg (4)
1-1/2 x 3-1/2 in. x
height to suit turner
Upper Leg Brace (2)
1-1/2 x 3-1/2 x 13 in.
Lower Leg Brace (2)
1-1/2 x 7-1/2 x 13 in.
Upper Rail (2)
1-1/2 x 3-1/2 x 33 in.
Glue and screw leg pieces
Recessed Hole,
drill hole and chisel one
side square for nut.
Machine
Bolt (12)
Motor Recommendations
The Nova 3000 can be purchased with or without a motor. In the USA, the 1HP AC Motor is included with
the lathe, in accordance with the recommendations outlined below. However, in most markets, the motor is
an optional extra. If you are providing your own motor, adhere to the recommendations below. A variable
speed DC motor may also be used; recommendations are similar to those for AC motors. Motors are
flange face mount.
AC Motor Recommendations
Country
Motor Recommendations
United States,
Canada
1 Hp or 1.5 Hp totally enclosed fan cooled (TEFC), continuous
duty, 1725 rpm, single phase, 60 Hz, with a keyed 5/8-inch
shaft, NEMA 56 frame C face flange.
New Zealand,
Australia, UK,
Europe, South Africa
1 Hp or 1.5 Hp, totally enclosed fan cooled (TEFC), continuous
duty, 1425 rpm, single phase, 50 Hz, with a keyed 19 mm
shaft, D80 Metric flange frame B14 face mount.
10
92-0106-017
