Limited Warranty and Product Return Procedure
Technical Data
Timer 031
Item
Power
24 V (ac)
±
10% 2 VA
32 V (dc)
±
20 % 0.04A
Relay
240 V (ac) 8 A 1/4 hp
pilot duty 240 VA 2 A
1
N/C
SCHD
Su
T I M E
AMPM
UNOCC
OVR
Sa
Mo
We Th Fr
Tu
1
2
2
3
4
5
Power
N/O Com
C-
R+
Cut jumper
for non-60 Hz
Override
Menu
—
Optimum Start / Stop
Lithium CR1620
POS (+) up
On
—
Off
Made in Canada
R
C US
158033
Wiring must be rated at least 300V
Temporary Occupied
Override
Press and release the
Override button to select
a Temporary Occupied
Override.
Temporary UnOccupied
Override
Press and release the
Override button for a
second time to select a
Temporary UnOccupied
Override.
Menu
Item
Override
Menu
Item
Override
Menu
Item
Override
Su
Sa
Mo
We Th Fr
Tu
UNOCC
OVR
Menu
Item
Override
Su
Sa
Mo
We Th Fr
Tu
OVR
Menu
Item
Override
Permanent Occupied
Override
Press and release the
Override button for a
third time to select a
Permanent Occupied
Override.
Permanent UnOccupied
Override
Press and release the
Override button for a
fourth time to select a
Permanent UnOccupied
Override.
Press and Release the
Override button for a fifth
time to turn the Override
option off.
SETTING THE OVERRIDE OPTIONS
Su
Sa
Mo
We Th Fr
Tu
OCC
OVR
T I M E
AM
OCC
1
Su
Sa
Mo
We Th Fr
Tu
Su
Sa
Mo
We Th Fr
Tu
OCC
OVR
Su
Sa
Mo
We Th Fr
Tu
UNOCC
OVR
Note: After selecting the desired Override option, allow the 031 to time-out to the
TIME display or press the Menu button.
To cancel an Override option, press the Override button when the 031 is in
TIME display.
The Override Options
are accessed when the
031 is in
TIME display.
The installer must ensure that this control and its wiring are isolated and / or shielded from strong sources of electromagnetic noise.
Conversely, this electronic control does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the
Radio Interference Regulations of the Canadian Department of Communications. If this equipment does cause interference, the user is
encouraged to try to correct the interference by reorienting the receiving antenna and / or relocating the receiver with respect to this
equipment.
Le présent numérique n'émete pas de bruits radioeléctriques dépassant les limites applicables aux appareils numériques de Classe B
prescrites dans le réglement sur le brouillance radioeléctriques édicte par le Ministére des Communications du Canada.
Limited Warranty The liability of tekmar Control Systems Ltd. and tekmar
Control Systems, Inc. (“tekmar”) under this warranty is limited. The purchaser,
by taking receipt of the tekmar product (“product”), acknowledges receipt of
the terms of the warranty and acknowledges that it has read and
understands same.
tekmar warrants each tekmar product against defects in workmanship and materi-
als, if the product is installed and used in compliance with tekmar's instructions. The
warranty period is for a period of twenty-four (24) months from the production date
if the product is not installed during that period, or twelve (12) months from the
documented date of installation if installed within twenty-four (24) months from the
production date.
The liability of tekmar under this warranty shall be limited to, at tekmar's sole dis-
cretion: the cost of parts and labor provided by tekmar to repair defects in materials
and/or workmanship of the defective product; or to the exchange of the defective
product for a replacement product; or to the granting of credit limited to the original
cost of the defective product, and such repair, exchange or credit shall be the sole
remedy available from tekmar, and, without limiting the foregoing in any way,
tekmar is not responsible, in contract, tort or strict product liability, for any
other losses, costs, expenses, inconveniences, or damages, whether direct, indi-
rect, special, secondary, incidental or consequential, arising from ownership or use
of the product, or from defects in workmanship or materials, including any liability
for fundamental breach of contract.
This warranty applies only to those products returned to tekmar during the
warranty period. This warranty does not cover the cost of the parts or labor
to remove or transport the defective product, or to reinstall the repaired or
replacement product. Returned products that are not defective are not cov-
ered by this warranty.
This warranty does not apply if the product has been damaged by negligence
by persons other than tekmar, accident, fire, Act of God, abuse or misuse; or
has been damaged by modifications, alterations or attachments made sub-
sequent to purchase which have not been authorized by tekmar; or if the
product was not installed in compliance with tekmar’s instructions and the
local codes and ordinances; or if due to defective installation of the product;
or if the product was not used in compliance with tekmar’s instructions.
This warranty is in lieu of all other warranties, express or implied, which the
Governing Law (being the law of British Columbia) allows parties to contrac-
tually exclude, including, without limitation, warranties of merchantability,
fitness for a particular purpose, durability or description of the product, its
non-infringement of any relevant patents or trademarks, and its compliance
with or non-violation of any applicable environmental, health or safety legis-
lation; the term of any other warranty not hereby contractually excluded is
limited such that it shall not extend beyond twenty-four (24) months from the
production date, to the extent that such limitation is allowed by the Govern-
ing Law.
Product Return Procedure
Products that are believed to have defects in work-
manship or materials must be returned, together with a written description of the
defect, to the tekmar representative for that territory. If the address of the repre-
sentative is not known, please request it from tekmar at the telephone number
listed below
.
Control Systems
tekmar Control Systems Ltd., Canada
tekmar Control Systems, Inc., U.S.A.
Head Office:
5100 Silver Star Road
Vernon, B.C. Canada V1
B
3K4
Tel. (250) 545-7749 Fax. (250) 545-0650
Web Site: www.tekmarcontrols.com
Product design, software and literature are Copyright © 2000 by:
tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
All specifications are subject to change without notice.
Printed in Canada. D 031 - 06/00.
4 of 4
Timer 031
Literature
— D 031, D 001
Control
— Microprocessor-based; This is
not a safety (limit) device.
Packaged weight
— 0.5 lb. (430 g), Enclosure C, white PVC plastic
Dimensions
— 4-3/4” H x 2-7/8 W x 7/8” D (120 x 73 x 22 mm)
Approvals
— CSA C US, meets ICES & FCC regulations for EMI/RFI.
Ambient Conditions
— Indoor use only, 32 to 122
°
F (0 to 50
°
C), < 90% RH non-
condensing.
Power supply
— Class 2, 24 V (ac)
±
10% 2 VA or 30 V (dc)
±
20% 0.04 A
Relay
— 240 V (ac) 8 A 1/4 hp, pilot duty 240 VA 2 A
Battery backup
— CR1620 Lithium non-rechargeable gives 40 events of 24 hours
power down.
Schedule memory
— Maintained for at least 10 years of power down.
Timer
— 7 day, 2 Occ & UnOcc events per day.
Adjustment
— 10 minute increments.
