Teka GZC 31330 XBB, Руководство пользователя

Страница: 33 / 68

33
SERVICING
CABLE TYPES AND SECTIONS
ATTENTION!!!
If the power supply cable is replaced, the installer should leave the ground wire (B) longer than the
phase conductors (fig. 14) and comply with the recommendations given in paragraph 8.
TYPE OF
HOT PLATE
TYPE OF
CABLE
SINGLE - PHASE
POWER SUPPLY
Gas hot plate H05 RR - F Section 3 x 0.75 mm
2
WARNING: MAINTENANCE MUST ONLY BE
PERFORMED BY AUTHORISED PERSONS.
In case of failure or cut in the cable, please move away from
the cable and do not touch it. Moreover the device must be
unplugged and not switched on. Call the nearest authorized
service center to fix the problem.
Keep the Warranty Certificate or the sheet of
technical data with the Instructions Handbook
during the appliance life. It contains important
technical data.