16
SERVICING
FIG. 22
14) REPLACING THE BATTERY
To change the battery (see fig. 22) comply with
following instructions:
- jnscrew cap “T” and remove exausty battery.
- Insert a 1.5 V new battery. The positive polarity
“+” is turn over inside.
- Rescrew the cap “T”.
- Re-assembly all the movable parts.
WARNING:
the batteries contain a dangerous material for
our ambient. Always put them in a separate and
safe container.
If you eliminate your appliance, remember to
take off the battery.
CAUTION
The device should not be operated for more
than 15 second.
If after 15 second, the burner has not lit, stop
operating the device & open the compartment
door and/or wait at least 1 minutes before
attempting a further ignite of the burner.
In the event of the flame being accidentally
extinguished, turn off the burner control and do
not attempt to re-ignite the burner for at least 1
minutes.
