Teka Combi NFE 400, Инструкция по эксплуатации

Страница: 16 / 82

What, if....
1- The appliance will not work, even
though it is switched on.
• Check if the power cable is properly
connected!
• Check if the mains supply is in order, or if a
circuit breaker has been tripped!
• Check the temperature control for correct
setting!
2- There is a power failure.
Keep the doors of your device closed. Frozen
food will not be affected if the power failure
lasts less than the ‘Conservation Time From
Failure” (hours) declaration mentioned in the
Technical Features leaflet. If the power failure
lasts longer, check the food and consume it
immediately.
You can also cook the defrosted food and
then re-freeze it.
3- The interior light does not work.
Check the power supply!
Check the installation of the light bulb! Unplug
the power cable before checking the light
bulb.
(Also see the section “Replacing the interior
light”)
4- There is high temperature alarm
If the actual temperature of the freezer
compartment is warm then the alarm icon on
the display (Fig. 2/m) lights on. The alarm
icon lights off when the actual temperature of
the freezer compartment cools down.
The high temperature alarm may rise up due
following situations.
a) Warm food storage
b) Warm air in the freezer compartment
c) Freezer door is left open for a long time
If the high temperature alarm remains on for
more than 24 hours then contact with the
customer service.
The high temperature alarm is not active in
24 hours after plugging the appliance into the
electricity.
5- There is error messages and alarm
Incase any failure condition due wiring
connection of the appliance occurs, and then
the alarm icon on the display (Fig. 2/m) starts
blinking together with the relevant error
message.
Incase some certain characters (E0, E3,
..etc.) appear on the display then contact with
the customer service. The fuzzy control
algorithm in order to preserve food takes
place till the customer service arrives.
The alarm icon lights off just after the removal
of the failure.
6- There is actual fridge temperature failure
The appliance performs cooling considering
the fridge set temperature. The actual fridge
temperature shown on the display will reach
the adjusted fridge set temperature, when the
packages are cold enough.
There may be some oscillations on the actual
fridge temperature shown on the display due;
a) The fridge door is Opened / Closed
frequently
b) Loading warm packages inside the fridge.
c) Leaving the fridge door open for a long
period of time
10
en en