BA_Caremaster-SF1-SF2_BGIA_110901_GB.doc
- 10 -
01.09.2011
7.2 Changing of particle filter
When the extraction performance decreases, the particle filter must be changed according to the
following procedure:
•
Disconnect the filter unit from the mains power supply..
•
Open the filter access door (Pos.10).
•
Lower the lifting mechanism (Pos.16) by turning the locking screw (Pos.17) downward..
•
Pull out the particle filter (Pos.15).
•
Install the new particle filter element
Caution :
Only use original TEKA particle filter elements.
•
Raise the lifting mechanism (Pos.16) by turning the locking screw (Pos.17) until the pre-
filter tray (Pos.13) sits tight. (At this time check the sealing gasket under the lid (Pos.7) for
possible damage.
•
Close the filter access door (Pos.10).
Connect the filter unit to the mains circuit. (Refer to the data on the type plate)
8 Disposal
To ensure perfect operation of your TEKA - SF-BIA extractor unit and proper disposal of the dust
that has been extracted, we offer the following services:
•
Help with finding a waste disposal company in your vicinity.
•
On request, we can supply a list of all waste disposal companies in Germany, free of charge.
•
A service and maintenance contract.
•
A customer help line.
Call our service department for these options: they are at your service – round the clock.
TEKA Fume Extraction LTD.
1 Liverpool Road North
GB-Maghull L31 2 HB
Telephone:
++44-(0) 151-2874775
Fax:
++44-(0) 151-2879601
