BA_Caremaster-SF1-SF2_BGIA_110901_GB.doc
- 6 -
01.09.2011
4 Safety instructions
When using electrical equipment, the following basic safety rules must be observed, for protection
against electric shock, injury, or fire hazards.
•
Before using the equipment, read and observe these instructions!
•
Keep the operating and maintenance instructions in a safe place!
•
Never use the equipment to extract easily inflammable or explosive gases!
•
Do not employ the unit for setting it in explosive zones, e.g. zone 0, zone 1, zone 2, zone 20,
zone 21, zone 22!
•
Do not employ the unit for sucking off burning or glowing materials, e.g. cigarettes, matches,
metallic types of dust and/or splinters, paper, cleaning cloths, etc.!
•
Do not employ the unit for sucking off burning and/or inflammatory materials, e.g. oils and/or oil
mist, fats, parting agent (e.g. silicone spray), cleaning agent, etc.!
•
Never use the equipment for the extraction of corrosive substances!
•
Never use the equipment for the extraction of burning or glowing material!
•
Never use the equipment to suck up any kind of liquid!
•
Do not use the equipment for the extraction of organic substances without written approval from
the manufacturer!
•
Protect the connectors from heat, moisture, oil, and sharp edges!
•
Keep to the permitted supply voltage! (Observe the data on the nameplate!)
•
Use only TEKA replacement parts!
•
Do not operate the equipment without a filter insert!
•
Disconnect the supply voltage before opening the filter unit!
•
The exhaust vent must not be covered up or blocked!
•
Always take care that the unit is standing in a stable position, and that the brakes on the castors
are on!
•
The filter unit must be disconnected from the mains supply voltage before cleaning or
maintenance, replacing parts, or a functional conversion!
•
The filter inserts cannot be regenerated!
•
Dispose of the filter inserts in accordance with the regulations!
•
If an energy-saving automatic start/stop is being used, the earthing cable must be checked for
possible damage before every welding session.
•
The unit must not be used if the earthing cable is not in perfect condition.
•
If external filter controls are used, the control cable must be checked for possible damage
before every operating session.
•
The unit must not be used if the control cable is not in perfect condition!
•
The mains supply cable for the unit must be checked regularly for possible damage!
•
The unit must not be used if the mains supply cable is not in perfect condition!
•
Do not use the filter unit if one or more of its components are faulty, missing, or damaged. In
any of these cases, please call the TEKA service department on ++44-(0) 151-2874775.
