Tek Drive TDS-F8, Инструкция по эксплуатации

Страница: 64 / 74

62
7- Motor Data Parameters
No. Parameter Name & Description Setting Range Default User set
7-01
Motor Rated Current (*.*A) *.*A *1
7-02
Motor No-load Current (%) 0~ 99 30
7-03
Motor Rated Slip (%) 0~ 9.9 0.0
7-04
Auto Torque Compensation Gain 0.0~ 2.0 0.0
8- Special Parameters
No. Parameter Name & Description Setting Range Default User set
8-01
DC Braking Frequency (Hz) 0.1~ 10.0Hz 1.5Hz
8-02
DC Braking Current Level (%) 0~ 80 40
8-03
DC Braking Time at Stop (Sec.) 0.0~ 25.5 0.5
8-04
DC Braking Time at Start (Sec.) 0.0~ 25.5 0.0
8-05
Momentary Power Loss Ride through Selection
0- Disabled
1- Enabled
0
8-06
Speed Search Detection Current Level (%) 0~ 150 100
8-07
Speed Search Deceleration Time (Sec.) 0.1~ 25.5 5.0
8-08
Minimum Baseblock Time (Sec.) 0.5~ 5.0 0.5
8-09
Jump Frequency1 (Hz) 0.0~ 400.0* 0.0
8-10
Jump Frequency2 (Hz) 0.0~ 400.0* 0.0
8-11
Jump Frequency3 (Hz) 0.0~ 400.0* 0.0
8-12
Jump Frequency Width (Hz) 0.0~ 25.5 1.0
8-13
Number of Automatic Restart Attempts 0~ 10 0
8-14
ON Delay Time of Timer Function (Sec.) 0.0~ 999.9 0.0(
☆
)
8-15
OFF Delay Time of Timer Function (Sec.) 0.0~ 999.9 0.0(
☆
)
8-16
PID Control Selection:
0- PID Control is Disabled
1- PID Control is Enabled
0
8-17
PID Feedback Gain 1~ 1000 100(
☆
)
8-18
PID Control Proportional Gain (P) 1~ 1000 100(
☆
)
8-19
PID Control Integral Time (I) (Sec.) 0.0~ 100.0 1.0(
☆
)
8-20
PID Control Derivative Time (D) (ms) 0~ 1000 0(
☆
)
8-21
PID Output Deviation (%) 0~ 109 0(
☆
)
8-22
PID Control Integral Upper Limit (%) 0~ 109 100
8-23
PID Control Output Primary Delay Time (Sec.) 0.0~ 2.5 0.0
8-24
PID Error Level (%) 0~ 100 100%
*: The setting value must meet the rule for 8-9
≧
8-10
≧
8-11.