Tek Drive TDS-F8, Инструкция по эксплуатации

Страница: 59 / 74

57
4. Parameter List & Introduction
F8's parameters are divided into 11 parameter groups according to the applied attributes of these parameters. User
can complete the setting before operate F8 according to the relevant parameters in the parameter groups. The 11
parameter groups are as follows.
0: User Parameters
1: Basic Parameters
2: Operating Method
3: Digital & Analog Output Terminal
4: Digital & Analog Input Terminal
5: Multi-preset Reference & Auto Process Operation
6: Protection Parameters
7: Motor Data
8: Special Parameters
9: Modbus Communication
U: Monitoring
This manual is a brief manual, just only make a simple list and description for the parameters. If you need more
detailed parameter description, please go to the TEK-DRIVE official website: https://www.tekdrive.com.tw/, to
download the TDS-F8 Instruction Manual, there are complete parameter descriptions and explanations in it.
Parameter List
Sometimes, there is a mark as following in the table,
*1 means the value will be different as different F8 type.
*2 means the value of 440V Class is twice of 220V Class.
*3 means only for External remote operator.
☆
means this parameter can be set while F8 is running.
0- User Parameters
No. Parameter Name & Description Setting Range Default User set
0-01
Unit displayed of Operator 0~ 1999
0
0-02
Monitor Selection after Powered Up.
0-Frequency Reference
2-Output Current
1-Output Frequency
0~ 2
0 (
☆
)
1- Basic Parameters
No. Parameter Name & Description Setting Range Default User set
1-01
F8 Power Rating 01~03, 21~22 * 1
1-02
Initialize Parameter (00~ 14):
00- All Parameters can be set & monitor
01- Parameters 0-01, 0-02, 1-02, 1-16, 5-01~5-08 can be set, the others can
be monitor only.
03- 2 wires Initialization, 220/440V, 60Hz
04- 3 wires Initialization, 220/440V, 60Hz
05- 2 wires Initialization, 200/415V, 60Hz
06- 3 wires Initialization, 200/415V, 60Hz
07- 2 wires Initialization, 220/380V, 50Hz
08- 3 wires Initialization, 220/380V, 50Hz
11- Clear All Fault Logs
02, 09~10,12~14- Reserved
0
1-03
Maximum Output Frequency (Hz) 50.0~ 400.0
60.0
1-04
Maximum Output Voltage (V) 0.1~ 255.0 220.0(*2)
1-05
Frequency of Maximum Output Voltage (Hz) 0.1~ 400.0 60.0