© by WilTec Wildanger Technik GmbH
Item 50106
Page 5
02 2022
-1
Functionality
A clean and clear water surface is the first requirement for a better view into the pond. Especially for this
purpose, WilTec has developed a surface suction device. This skimmer runs on the pond and sucks in
the dirt from the water surface continuously by means of a built-in pump. The pump capacity amounts
to 2000
ℓ
⁄
h
and it keeps 25
m² pond surface clear
Maintenance and cleaning
During maintenance and cleaning work plug out the power cable. It is possible (depending on the degree
of dirt/soiling), that the rotor of the built-in pump must be cleaned.
Proceed as follows:
1.
Pull out the plug and remove the skimmer from the pond.
2.
Remove the skimmer strainer and the filter sponge.
3.
Carefully dismantle the pond pump from the pump housing.
4.
Clean the pump and the pump housing.
5.
Then reassembly the skimmer in reversed order.
6.
For cleaning or replacing the skimmer strainer or the filter sponges follow the same procedure.
For cleaning, only use pond water, by no means sharp-edged items (e.g., screwdriver, knife).
Parts list
№
Name
№
Name
50106–01
Floating body
50106–12
Top piece fixing basket
50106–02
Dirt collection basket
50106–13
Fixing basket
50106–03
Floater
50106–14
Fixing chain
50106–04
Base
50106–15
Screws
50106–05
Floater bracket
50106–16
Fountain nozzle 1
50106–06
Connection piece
50106–17
Fountain nozzle 2
50106–07
Sealing ring
50106–18
Fountain nozzle 3
50106–08
Stepped hose tail
50106–19
Fountain nozzle 4
50106–09
Union nut
50106–20
Fountain nozzle 5
50106–10
Filter cover (insert dirt collection basket)
50106–21
Fountain bar/rod
50106–11
Top piece filter cover
50106–22
Fountain nozzle 6