TEFAL Smartea, Руководство пользователя

Страница: 39 / 42

73
72
– After put all the ingredients and water, PLACE CORRECTLY THE LID
before selecting the program
– When the required temperature is reached in the first step, the tea
maker beeps 3 times and the keep warm function (for programs with
keep warm setting) begins.
– When the total program (including keep warm time) is finished, the
tea maker beeps twice, stops heating, and actual temperature will
show on the screen.
For P2,3,4,5,7,8, the drink is ready to serve after the total program
(including keep warm time) finishes.
Use thermal protective gloves for removal of the accessories after use,
they are very hot.
When the user brings the body back onto the control base within 10
minutes, the keep warm button blinks during 10 seconds, the user just
needs to short press the button to resume the keep warm (in this case
the light changes from Blinking to On). If the user does not press the
button within 10 seconds, the button light changes from Blinking to Off,
and the keep warm cycle is definitively cancelled.
B. Manual Mode
In the manual mode:
– Press the temperature selection button, select the temperature: 40°C,
50°C, 60°C, 70°C, 80°C, 85°C, 90°C, 100°C.
– Press the keep warm selection button, select the keep warm time: 10
min, 20 min, 30 min, 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours,
7 hours, 8 hours.
– The keep warm function will keep warm at the selected temperature
in step 1.
– Once the temperature is reached, the tea maker beeps 3 times and
goes into keep warm function.
– Once all the process has finished, the tea maker beeps 2 times and
stops heating, and actual temperature will show on the screen.
C. Shut-down and standby
If no cycle is ongoing and if no buttons are pressed, the machine goes
automatically into standby mode and switches off after 5 minutes.
The machine can be switched on again simply by long pressing the on/
off button.
If you wish to switch the machine off manually, long press the on/off
button.
Program
Recipe temperature
and time
Operation
P5 Double
boiling 30 minutes* or 1 hour
at 70°C
Put all the ingredients or drink (maximum
420 ml) in the boiling bottle, pour 1L of water
in the teapot, then insert the boiling bottle in
the teapot, put the tea pot back to the power
base then
select P5 Double boiling mode.
Press Keep warm button to choose the desired
boiling time.
(Fig. V)
P6 Milk
formula 8 hours* at 40°C Once the water is boiled to 100° (operation
refer to P1 Water boiling 100° mode),
select P6
Milk formula mode to maintain the water at
40°C for 8 hours. (Fig. V)
P7 Egg boiling - Hard-boiled egg: 20
minutes* at 100°C
- Soft-boiled egg: 7
minutes* at 100°C Put 3 eggs into the egg tray, and insert the egg
tray in the teapot, pour 800ml of water in the
teapot, put the teapot back to the power base,
then
select P7 Egg boiling mode . Press Keep
warm button to choose the desired boiling time
P8 Yogurt 6 hours* at 40°C
Put 100ml yogurt and 300ml milk in the boiling
bottle, insert the boiling bottle in the teapot,
pour 800ml of water in the teapot, put the tea
pot back to the base then
select P8 Yogurt
mode. (Fig. V)
Manual mode See part B 2 methods to enter to Manual mode:
- Put the kettle on the powerbase, push the on/
off button
- Push the program button, Manual mode is
after the P8
*Countdown or count up starts when the target temperature is reached
– Once all the ingredients are added, put the correspondent accessory
back to the base. The base will light up and indicate the water
temperature in real time.
– After choosing program, the tea maker will start automatically after
5 seconds with 1 beep.
– Note: It is possible to start the cycle before the automatic start by
pressing the on/off button.
EN