Beat/emulsify/whisk: speed 1 to 12 and turbo
(Maximum usage time : 10 min)
• Use the balloon whisk
(C3)
.
• You can prepare mayonnaise, aioli, sauces, whipped egg whites (up to 10 egg whites) (up to 500 ml).
• Never use the balloon whisk (C3) to knead heavy dough or mix light dough.
Starting up:
Program an operation time as shown on the TIMER feature or start immediately by turning the speed
selector
(A1)
to the position required by the recipe.
• The appliance will turn on automatically.
• You can add ingredients through the hole in the lid
(B2)
during cooking.
• To turn off the appliance, turn the speed selector
(A1)
to 0 or wait for the appliance to turn off auto-
matically if using the TIMER feature.
Dismantling the accessories:
• Wait for the appliance to come to a complete stop.
• Tilt the handle
(A2)
,located on the right side of the appliance, unlock the multi-function head
(A0)
and
lock it in an elevated position.
• Remove the lid
(B2
).
• Unlock the accessory
(C1),
(C2)
or
(C3)
from the multi-function head by pulling on the accessory whilst
turning it towards the back.
• You can remove the bowl.
2 - BLENDING/MIXING/STIRRING (depending on model) (L or D)
•
Depending on the ingredients used, the mixing jug
(L or D)
lets you prepare up to 1.5 L of thick mixtures
and 1.25 L of liquid mixtures.
Accessories used:
•
Plastic or stainless steel mixing jug
(L or D)
.
Fitting the accessories:
• Set up the blade assembly
(L1)
with a seal
(L2)
and join it by making a quarter turn on the jug
(L3)
,
clockwise. (with the jug upright).
(fig. 2a)
• Add the ingredients to the mixing jug, lock the lid
(L5)
and fit the measuring cap
(L6)
.
• Tilt the handle
(A2)
located on the right side of the appliance to unlock the multi-function head
(A0)
and lock it in elevated position.
• Place the bowl
(B1)
on the appliance, handle facing you, and slowly turn it to the left until it stops.
• Take the lid
(B2)
with your left hand and slide it in the runners located at the front and back of the
head
(A0)
until the stop.
• Tilt the handle
(A2)
located on the right side of the appliance to unlock the multi-function head
(A0)
,
slide it down and press it firmly to lock it on the bowl (audible click).
(fig. 2b)
• Unlock and remove the safety cover
(A5)
from the outlet (A4)by turning it counter-clockwise.
• Lock the blender
(L or D)
on the outlet
(A4)
by turning it clockwise.
(fig. 2c)
Tips:
You can prepare:
- finely blended soups, veloutés, stewed fruit, milkshakes and cocktails.
- liquid batter (Yorkshire puddings, pancake, custard flans, etc).
- shaved ice
• You can add food through the hole in the measuring cap
(L6 or D3)
during preparation.
•Never fill the blender with boiling liquid.
Operating your appliance
(maximum running time: 3 min)
:
Program an operation time as shown on the TIMER feature or start immediately by turning the speed
selector
(A1)
to the position required by the recipe (from «1 to 12» or «Pulse»).
Use the «Pulse» position for better control when mixing small quantities
(A1’)
and for an even finer texture,
use the «Turbo» button».
(A12)
.
Removing the accessory:
•
Wait for the appliance to come to a
complete stop
before removing the blender by unscrewing coun-
ter-clockwise.
• Replace the safety cover
(A5)
by screwing it onto the outlet
(A4)
.
3 - MINCER (depending on model) (F)
Accessory used:
- Assembled mincer head
(F)
Fitting the accessory:
• Hold the body
(F1)
by the feed tube, with the wider opening uppermost.
• Insert the feed screw
(F2)
in the body
(F1)
.
• Slot in the blade
(F3)
on the axis,
pointing the cutting edges (flat parts) upwards
.
• Fit the chosen screen
(F4 or F5)
on the blade
(F3)
, aligning the two lugs with the two notches in
the body
(F1)
.
• Screw the nut
(F6)
to the bottom of the body
(F1)
.
(fig. 3a)
• Check the assembly. The shaft should have no play, neither should it be able to turn on its own.
• Attach the safety cover
(A9)
under the multi-function head
(A0),
push it until you hear a «click» to
ensure it is locked.
(fig. 3c)
or attach the blender (B1) and the cover
(B2)
.
• Remove the cover (A8)from the outlet
(A7)
. Check that the security cover
(A5)
is locked properly on
the outlet
(A4)
.
(fig. 3b)
• Set up the assembled mincer head (F) tilted towards yourself, opposite the outlet (A7), hold the
mincer head at the bottom. Reattach the mincer head’s feed tube vertically until it lock by turning it
towards the back.
(fig. 3c)
• Place the removable tray
(F8)
on the feed tube.
(fig. 3d)
Tips:
• Prepare all of the ingredients to be minced (for meat, remove the bones, gristle and nerves and cut
it into pieces).
• At the end of the operation, you can feed a few small pieces of bread into the feed tube to clear any
meat remaining in the machine.
• You can mince up to 3 kg of meat, maximum running time: 15 min
Starting and removing:
• Place a large bowl or the blender bowl
(B1)
in front of the appliance to collect the minced product.
• Start the appliance by turning the speed control to speed 12. Wait a few seconds for the appliance to
reach the desired speed.
• Insert the pieces of meat into the feed tube piece by piece.
Never push the ingredients down the feed
tube with your fingers or any other utensil: use the pusher (F7)
• To stop the appliance, turn the speed selector to 0 and wait for the appliance to come to a complete
stop.
• Unlock the mincer head in the reverse order of the assembly.
81
80
EN
EN
