V6.x // 06-2016
Setup and Operation
P. 17
For device type
e-litro gsm
Error messages GSM module / SIM card / Mobile network
Error
M 0
GSM modem is inactive.
Entering PIN => 0000 completely deactivates the modem.
Error
M 1
Internal communication error. The device automatically executes an internal RESET
and retries communicating with the internal modem.
Error
M 2
SIM card is not inserted, is not readable or is defective.
Please check the SIM card using a mobile phone.
Error
M 3
PUK code must be entered. Wrong PIN has been entered three times, SIM-card is
locked. Insert the SIM card in a mobile phone and enter the PUK code to unlock it.
Error
M 4
No credit on the prepaid account.
Error
M 5
No mobile network available for the SIM card (an external antenna could help).
Destination number set correctly? (please check)
Error
M 6
Network or other failure during sending procedure.
Error
M 7
Mobile network registration not completed yet.
Error
M 8
Interlock is active! In case of too many failed network logins after 7 days only 1 dial-
in trial will be performed on a daily basis for 255 days maximum.
The [Enter] button activates the device for another logon trial.
In case of a successful sending the interlock will be removed.
Error
M 9
No destination mobile number configured yet.
#T command or OilView-connection not configured yet.
Relay-
remote control:
Telecontrol / Teleswitching via relay of the
‘e-litro gsm’ device:
The relay can be operated by #S-commands.
Please refer to the additional device parametrization.
