20
•
Press the Enter-button to confirm.
Automatic PAN/TILT calibration
With the function "Encoders" you can calibrate the PAN/TILT movement to the correct starting position.
Adjust PAN/TILT speed
With this function you can define the PAN/TILT speed. You can select one of two different modes.
UI Set
Mic sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.
•
Select
“Mic Sens”
by pressing Up or Down.
•
Press the Enter-button.
•
Press Up or Down to select the desired sensitivity.
•
Press the Enter-button to confirm.
No DMX status
With the function
"No Signal"
, you can set different modes if there is no DMX-signal.
•
Select
"Close, Hold, Auto or Music"
by pressing Up or Down.
•
Press Up or Down to select between "Close", "Hold", "Auto" or "Music".
•
Press the Enter-button to confirm.
Select temperature designation
With this function you can select the temperature designation.
•
Select
“Temperature C/F”
by pressing Up or Down.
•
Press Up or Down to select the desired degree between “Celsius” and “Fahrenheit”.
•
Press the Enter-button to confirm.
Hibernation - power standby mode
With this function you can put the device in the power standby mode. This function will be automatically
activated after a predefined period of time of no DMX activity. In standby mode the lamp/LEDs and all motors
will power down if no DMX signal is sent to the fixture for a period of e. g. 15 minutes (can be user defined).
The fixture will automatically reset and return to normal operation once a DMX signal is sendet.
Backlight
With this function you can shut off the display after 2 to 60 minutes.
Flip Display
With this function you can flip the display by 180° for a better view when the fixture is hung from the truss or a
ceiling.
Short-cut: Press “up” and “down” for three seconds to flip the display directly.
Brand Show
With this function you can show or hide the brand name 'TECSHOW' on the display during
menu operation, but still show it after reset.
Key lock
With this function you can lock the keys of the Control Board to e.g. prevent menu tampering. If this function is
activated, the keys will be automatically locked as soon as exit the menu. In order to deactivate or temporarily
deactivate the keylock function, press the button UP-DOWN-LEFT-RIGHT-ENTER regain access to the menu
commands.
Users
User mode
With this function, you can create user defined channel orders.
Edit User
With this function, you can adjust the Preset user defined channel order.
Calibration
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password for
this function is
“050“.
